Search Results - "Mahendran, Arunjunai Raj"

Journal Article

Processing and Characterization of Natural Fibre Reinforced Composites using Lignin Phenolic Binder

by ARUNJUNAI RAJ MAHENDRAN WUZELLA, Günter AUST, Nicolai MÜLLER, Uwe KANDELBAUER, Andreas Published in Polymers & polymer composites (2013)

“...Natural fibre-reinforced composites were prepared using a lignin-phenolic resol binder, in which 30 wt.-% of the phenol was substituted by a modified...”

Journal Article

Smart paper from graphene coated cellulose for high-performance humidity and piezoresistive force sensor

by Khalifa, Mohammed Wuzella, Guenter Lammer, Herfried Mahendran, Arunjunai Raj Published in Synthetic metals (01.08.2020)

“...[Display omitted] •Graphene coated on paper through a facile dip-coating and vacuum filtration method.•Humidity sensor showed high response (290 %) and...”

Journal Article

Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types

by Todorovic, Andrea Resch‐Fauster, Katharina Mahendran, Arunjunai Raj Oreski, Gernot Kern, Wolfgang Published in Journal of applied polymer science (20.04.2021)

“...The effect of the hardener type and amount on the curing reaction and the resulting thermal and mechanical performance characteristics of epoxidized linseed...”

Journal Article

Isoconversional cure kinetics of a novel thermosetting resin based on linseed oil

by Wuzella, Günter Mahendran, Arunjunai Raj Beuc, Christopher Lammer, Herfried Published in Journal of thermal analysis and calorimetry (18.03.2020)

“...In the current work, the thermal curing process of maleinated acrylated epoxidized linseed oil (MaAELO) mixed with reactive diluent, initiator, and accelerator...”

Journal Article

Physicochemical characteristics of bio‐based thermoplastic polyurethane/graphene nanocomposite for piezoresistive strain sensor

by Khalifa, Mohammed Ekbote, Govind S Anandhan, S Wuzella, Guenter Lammer, Herfried Mahendran, Arunjunai Raj Published in Journal of applied polymer science (20.11.2020)

“...Herein, we report the physicochemical characteristics and piezoresistive strain sensing performance of flexible thin film comprising graphene and bio‐based...”

Journal Article

Anhydride Cured Bio‐Based Epoxy Resin: Effect of Moisture on Thermal and Mechanical Properties

by Anusic, Andrea Resch‐Fauster, Katharina Mahendran, Arunjunai Raj Wuzella, Günter Published in Macromolecular materials and engineering (01.07.2019)

“...This paper describes the development of a novel thermoset based on epoxidized hemp seed oil. The optimization of the hardener (anhydride) and crosslinking...”

Journal Article

Thermal cure kinetics of epoxidized linseed oil with anhydride hardener

by Mahendran, Arunjunai Raj Mahendran, Arunjunai Raj Wuzella, Günter Wuzella, Günter Kandelbauer, Andreas Kandelbauer, Andreas Aust, Nicolai Aust, Nicolai Published in Journal of thermal analysis and calorimetry (01.03.2012)

“...The thermal cure kinetics of an epoxidized linseed oil with methyl nadic anhydride as curing agent and 1-methyl imidazole as catalyst was studied by...”

Fulltext

Journal Article

Microfibrillated Lignocellulose Enables the Suspension-Polymerisation of Unsaturated Polyester Resin for Novel Composite Applications

by Yan, Yutao Herzele, Sabine Mahendran, Arunjunai Raj Edler, Matthias Griesser, Thomas Saake, Bodo Li, Jianzhang Gindl-Altmutter, Wolfgang Published in Polymers (11.07.2016)

“...A new route towards embedding fibrillated cellulose in a non-polar thermoset matrix without any use of organic solvent or chemical surface modification is...”

Fulltext

Journal Article

High-Performance Natural Fiber Composites Made from Technical Flax Textiles and Manufactured by Resin Transfer Molding

by Pichler, Stefan Mahendran, Arunjunai Raj Wuzella, Günter Hardt-Stremayr, Thomas Lammer, Herfried Published in Key engineering materials (03.07.2017)

“...In the present work it is shown that the resin transfer molding (RTM) is a beneficial technique to manufacture natural fibers into high-performance natural...”

Journal Article

Indane‐based bismaleimide and cloisite 15a nanoclay blends: Kinetics of thermal curing and degradation of particulate nanocomposites

by Surender, Rajendran Mahendran, Arunjunai Raj Alam, Sarfaraz Vijayakumar, Chinnaswamy Thangavel Published in Polymer composites (01.08.2013)

“...Bismaleimide, 5(6)‐maleimide‐1(4′‐maleimidophenyl)‐1,3,3′‐trimethyl indane (BMII) was prepared, different weight ratios (1, 3, 5, 7, and 9%) of cloisite 15a...”

Journal Article

Photocrosslinking of an Acrylated Epoxidized Linseed Oil: Kinetics and its Application for Optimized Wood Coatings

by Wuzella, Günter Mahendran, Arunjunai Raj Müller, Uwe Kandelbauer, Andreas Teischinger, Alfred
edited by Bismarck, Alexander Blaker, Jonny
Published in Journal of polymers and the environment (01.12.2012)

“...Over the past few decades, the industry developed an increasing interest in using renewable, bio-based thermosetting polymers as matrix systems for composites...”

Fulltext

Journal Article

High Performance Green Composites for Green Technologies

by Mahendran, Arunjunai Raj Anusic, Andrea Schledjewski, Ralf Blößl, Yannick Wuzella, Günter Lloret Pertegas, Silvia Resch-Fauster, Katharina Published in Key engineering materials (03.07.2017)

“...Composite materials do offer freedom to design a material fitting best to the requirements of a given application. In case of fiber reinforced polymers...”

Journal Article

Carbon Microparticles from Organosolv Lignin as Filler for Conducting Poly(Lactic Acid)

by Köhnke, Janea Fürst, Christian Unterweger, Christoph Rennhofer, Harald Lichtenegger, Helga C Keckes, Jozef Emsenhuber, Gerhard Mahendran, Arunjunai Raj Liebner, Falk Gindl-Altmutter, Wolfgang Published in Polymers (26.05.2016)

“...Carbon microparticles were produced from organosolv lignin at 2000 °C under argon atmosphere following oxidative thermostabilisation at 250 °C. Scanning...”

Fulltext

Journal Article

Green Composite Material Made from Typha latifolia Fibres Bonded with an Epoxidized Linseed Oil/Tall Oil-Based Polyamide Binder System

by Wuzella, G黱ter Raj Mahendran, Arunjunai Kandelbauer, reas Published in Journal of renewable materials (2020-00-00)

Journal Article

Paper-based laminates produced with kraft lignin-rich phenol–formaldehyde resoles meet requirements for outdoor usage

by Ghorbani, Masoumeh Ghorbani, Masoumeh Mahendran, Arunjunai Raj Mahendran, Arunjunai Raj van Herwijnen, Hendrikus W. G van Herwijnen, Hendrikus W. G Liebner, Falk Liebner, Falk Konnerth, Johannes Konnerth, Johannes Published in European Journal of Wood and Wood Products (01.03.2018)

“...Suitability of lignin–phenol–formaldehyde (LPF) resoles was investigated for manufacturing paper-based high-pressure laminates. As lignin source, pine kraft...”

Fulltext

Journal Article

Electrically conductive kraft lignin-based carbon filler for polymers

by Gindl-Altmutter, Wolfgang Fürst, Christian Mahendran, Arunjunai raj Obersriebnig, Michael Emsenhuber, Gerhard Kluge, Marcel Veigel, Stefan Keckes, Jozef Liebner, Falk Published in Carbon (New York) (01.08.2015)

“...Commercial kraft lignin was thermostabilised by heating up to 250[degrees]C at a rate of 0.01[degrees]Cmin.sup.-1 in ambient atmosphere. Subsequent...”

Journal Article

Synthesis and thermal studies of bis(isomaleimide)/bisphenol A and ortho novalac blends

by Sarannya, Vijayakumar Rishwana, S Shamim Mahalakshmy, Rajaram Mahendran, Arunjunai Raj Surender, R Vijayakumar, Chinnaswamy Thangavel Published in Journal of elastomers and plastics (01.10.2020)

“...Phenol formaldehyde ortho novalac (ON) resin and 4,4′-bisisomaleimidodiphenyl methane (VS) were prepared. Bisphenol A (BPA) and ON were blended with VS in...”

Journal Article

Synthesis, characterization and degradation behavior of thermoplastic polyurethane from hydroxylated hemp seed oil

by Surender, Rajendran Surender, Rajendran Mahendran, Arunjunai Raj Mahendran, Arunjunai Raj Wuzella, Günter Wuzella, Günter Vijayakumar, Chinnaswamy Thangavel Vijayakumar, Chinnaswamy Thangavel Published in Journal of thermal analysis and calorimetry (01.01.2016)

“...Thermoplastic polyurethane based on renewable resource was synthesized from hydroxylated hemp seed oil. Before hydroxylation, the cold-pressed hemp seed oil...”

Fulltext

Journal Article

Thermoplastic polyurethane composites reinforced with renewable and sustainable fillers - a review

by Khalifa, Mohammed Anandhan, S Wuzella, Günter Lammer, Herfried Mahendran, Arunjunai Raj Published in Polymer-plastics technology and materials (01.11.2020)

“...Thermoplastic polyurethane (TPU) reinforced with natural or renewable fillers gained significant attention in the scientific community and industries. The...”

Journal Article

Preparation and Characterization of Partially Degraded High-Density Polyethylene in an Internal Mixer

by Mahendran, Arunjunai Raj Aust, Nicolai Vijayakumar, Chinnaswamy Thangavel Lederer, Klaus Published in Polymer-plastics technology and engineering (30.10.2008)

“...The partial degradation of high-density polyethylene was done in an internal mixer for different residence time. The oxidative thermomechanical degradation...”

Narrow search