Search Results - "Wuzella, Günter"

Journal Article

Anhydride Cured Bio‐Based Epoxy Resin: Effect of Moisture on Thermal and Mechanical Properties

by Anusic, Andrea Resch‐Fauster, Katharina Mahendran, Arunjunai Raj Wuzella, Günter Published in Macromolecular materials and engineering (01.07.2019)

“...This paper describes the development of a novel thermoset based on epoxidized hemp seed oil. The optimization of the hardener (anhydride) and crosslinking...”

Journal Article

Isoconversional cure kinetics of a novel thermosetting resin based on linseed oil

by Wuzella, Günter Mahendran, Arunjunai Raj Beuc, Christopher Lammer, Herfried Published in Journal of thermal analysis and calorimetry (18.03.2020)

“...In the current work, the thermal curing process of maleinated acrylated epoxidized linseed oil (MaAELO) mixed with reactive diluent, initiator, and accelerator...”

Journal Article

Photocrosslinking of an Acrylated Epoxidized Linseed Oil: Kinetics and its Application for Optimized Wood Coatings

by Wuzella, Günter Mahendran, Arunjunai Raj Müller, Uwe Kandelbauer, Andreas Teischinger, Alfred
edited by Bismarck, Alexander Blaker, Jonny
Published in Journal of polymers and the environment (01.12.2012)

“...Over the past few decades, the industry developed an increasing interest in using renewable, bio-based thermosetting polymers as matrix systems for composites...”

Fulltext

Journal Article

Synthesis, characterization and degradation behavior of thermoplastic polyurethane from hydroxylated hemp seed oil

by Surender, Rajendran Surender, Rajendran Mahendran, Arunjunai Raj Mahendran, Arunjunai Raj Wuzella, Günter Wuzella, Günter Vijayakumar, Chinnaswamy Thangavel Vijayakumar, Chinnaswamy Thangavel Published in Journal of thermal analysis and calorimetry (01.01.2016)

“...Thermoplastic polyurethane based on renewable resource was synthesized from hydroxylated hemp seed oil. Before hydroxylation, the cold-pressed hemp seed oil...”

Fulltext

Journal Article

Thermal cure kinetics of epoxidized linseed oil with anhydride hardener

by Mahendran, Arunjunai Raj Mahendran, Arunjunai Raj Wuzella, Günter Wuzella, Günter Kandelbauer, Andreas Kandelbauer, Andreas Aust, Nicolai Aust, Nicolai Published in Journal of thermal analysis and calorimetry (01.03.2012)

“...The thermal cure kinetics of an epoxidized linseed oil with methyl nadic anhydride as curing agent and 1-methyl imidazole as catalyst was studied by...”

Fulltext

Journal Article

Photocrosslinkable modified vegetable oil based resin for wood surface coating application

by Mahendran, Arunjunai Raj Wuzella, Günter Aust, Nicolai Kandelbauer, Andreas Müller, Uwe Published in Progress in organic coatings (01.08.2012)

“...An acrylated epoxidized linseed oil (AELO) was synthesized from epoxidized linseed oil through ring opening of the oxirane group using acrylic acid as ring...”

Journal Article

Novel, binder-free fiber reinforced composites based on a renewable resource from the reed-like plant Typha sp

by Wuzella, Günter Mahendran, Arunjunaj Raj Bätge, Thorsten Jury, Sandra Kandelbauer, Andreas Published in Industrial crops and products (2011)

“...▶ This paper describes for the first time the preparation and some properties of fiber-composites based on Typha sp. ▶ The surprising and extraordinary...”

Journal Article

Influence of thermo-analytical and rheological properties of an epoxy powder coating resin on the quality of coatings on medium density fibreboards (MDF) using in-mould technology

by Wuzella, Günter Kandelbauer, Andreas Mahendran, Arunjunai Raj Müller, Uwe Teischinger, Alfred Published in Progress in organic coatings (01.10.2014)

“...Powder coating of engineered wood panels such as medium density fibreboards (MDF) is gaining industrial interest due to ecological and economic advantages of...”

Journal Article

Thermochemical and isoconversional kinetic analysis of a polyester–epoxy hybrid powder coating resin for wood based panel finishing

by Wuzella, Günter Kandelbauer, Andreas Mahendran, Arunjunai Raj Teischinger, Alfred Published in Progress in organic coatings (2011)

“...Powder coating is an established technology especially for the surface finishing of metallic substrates for example in the automotive industry. Moreover,...”

Journal Article

High-Performance Natural Fiber Composites Made from Technical Flax Textiles and Manufactured by Resin Transfer Molding

by Pichler, Stefan Mahendran, Arunjunai Raj Wuzella, Günter Hardt-Stremayr, Thomas Lammer, Herfried Published in Key engineering materials (03.07.2017)

“...In the present work it is shown that the resin transfer molding (RTM) is a beneficial technique to manufacture natural fibers into high-performance natural...”

Journal Article

Powder coating of veneered particle board surfaces by hot pressing

by Badila, Monica Jocham, Christoph Zhang, Wenbiao Schmidt, Thomas Wuzella, Günter Müller, Uwe Kandelbauer, Andreas Published in Progress in organic coatings (01.10.2014)

“...The powder coating of veneered particle boards by the sequence electrostatic powder application – powder curing via hot pressing is studied in order to create...”

Journal Article

High Performance Green Composites for Green Technologies

by Mahendran, Arunjunai Raj Anusic, Andrea Schledjewski, Ralf Blößl, Yannick Wuzella, Günter Lloret Pertegas, Silvia Resch-Fauster, Katharina Published in Key engineering materials (03.07.2017)

“...Composite materials do offer freedom to design a material fitting best to the requirements of a given application. In case of fiber reinforced polymers...”

Journal Article

Processing and Characterization of Natural Fibre Reinforced Composites using Lignin Phenolic Binder

by ARUNJUNAI RAJ MAHENDRAN WUZELLA, Günter AUST, Nicolai MÜLLER, Uwe KANDELBAUER, Andreas Published in Polymers & polymer composites (2013)

“...Natural fibre-reinforced composites were prepared using a lignin-phenolic resol binder, in which 30 wt.-% of the phenol was substituted by a modified...”

Journal Article

Properties of Woven Natural Fiber-Reinforced Biocomposites

by Mahendran, Arunjunairaj Wuzella, Günter Hardt-Stremayr, Thomas Gindl-Altmutter, Wolfgang Published in Journal of renewable materials (07.06.2016)

“...Woven natural fiber-reinforced composites were fabricated using four different flax fabrics and two biobased epoxy resin matrices. The reinforced composites...”

Journal Article

Thermoplastic polyurethane composites reinforced with renewable and sustainable fillers - a review

by Khalifa, Mohammed Anandhan, S Wuzella, Günter Lammer, Herfried Mahendran, Arunjunai Raj Published in Polymer-plastics technology and materials (01.11.2020)

“...Thermoplastic polyurethane (TPU) reinforced with natural or renewable fillers gained significant attention in the scientific community and industries. The...”

Journal Article

Thermal Characterization of Kraft Lignin Phenol-Formaldehyde Resin for Paper Impregnation

by Mahendran, Arunjunaj Raj Wuzella, Günter Kandelbauer, Andreas Published in Journal of adhesion science and technology (01.01.2010)

“...Both kraft lignin phenol-formaldehyde (KLPF) and phenol-formaldehyde (PF) resins were synthesized and the curing kinetics of the resins was determined using...”

Journal Article

Synthesis, characterization, and properties of isocyanate-free urethane coatings from renewable resources

by Mahendran, Arunjunai Raj Mahendran, Arunjunai Raj Wuzella, Günter Wuzella, Günter Aust, Nicolai Aust, Nicolai Müller, Uwe Müller, Uwe Published in Journal of Coatings Technology and Research (01.05.2014)

“...Isocyanate-free urethane coatings were prepared from renewable resources through the aminolysis reaction of five-membered cyclic carbonate from linseed oil and...”

Journal Article

Adhesion Improvement of Powder Coating on Medium Density Fibreboard (MDF) by Thermal Pre-treatment

by Jocham, Christoph Schmidt, Thomas W Wuzella, Günter Teischinger, Alfred Kandelbauer, Andreas Published in Journal of adhesion science and technology (01.01.2011)

“...In the powder coating of non-conventional substrates such as engineered wood, natural fibre composites or synthetic polymers, several technological problems...”

Journal Article

Synthesis and Characterization of a Bio‐Based Resin from Linseed Oil

by Mahendran, Arunjunai Raj Aust, Nicolai Wuzella, Günter Kandelbauer, Andreas Published in Macromolecular symposia. (01.01.2012)

“...The use of renewable raw materials in the polymer industries is becoming increasingly popular because of environmental concerns and the need to substitute...”

Journal Article

Dielectric analysis as curing control for aminoplast resins—correlation with DMA

by Pretschuh, Claudia Müller, Uwe Wuzella, Günter Dorner, Florian Eckmann, René Published in European Journal of Wood and Wood Products (01.09.2012)

“...Dielectric analysis (DEA) is a well-known method used for the monitoring of curing processes in non-aqueous radical or polyadditive systems. Tests on...”

Fulltext

Narrow search